Blue Ripper Sr Rail Saw, BRSR3HP

Description

* 2 Horsepower Air-cooled
If 220 volt power is not available at your location, this is the Blue Ripper Sr rail saw for you. Built to the same specification as our 3hp saw, and spinning at the same speed of 1750 rpm. This saw works best on 2cm thick materials, multiple passes are often required for 3cm and thicker materials, due to the lack of Horse Power.

These saws can cut through 4cm thick stone. The 3hp can cut 2cm "Absolute Black" granite up to the incredible speed of 10 ft. per MINUTE! Simple and strong, the blade cuts next to rail so setting up is fast and easy. No gauge, shims, or offset measurements are needed. The 5hp saw itself, weights only 68 lbs. which makes it easy for a single person to lift and move. The reduced weight also minimizes risk of cracking narrow or thin pieces of material. This rail saw is truly amazing and is considered by the experts to be far superior than the competition in performance and ease of use.

---------------------------------------------------------------------------

Up to 10 FPM cut speed
1730 RPM TEFC Lincoln Induction Motor (2hp & 3hp models)
2hp 110v at 18 Amps
14 inch blade
60mm blade arbor
8" diameter billet aluminum flanges
All connections mounted vertical
One-hand water disconnect
Easy-adjust locking height adjustment
Weight: Only 79 lbs approx. on (2 and 3hp) models!
Cuts through 4cm (1-5/8") stone
Manufactured with PRIDE in the USA!