|
|
|
|
|
|
Alpha CNC Core Bits for Dekton
|
|
|
Alpha CNC Core Bits for Dekton®
Diameter: 1-1/4"
Max RPM: 3,500
Recommended For: Dekton®, Crystallized Glass
Threads: 1/2" Gas Thread
Alpha® introduces a Wet Core Drill Bit for CNC Machines
and Radial Arm workstations for cutting Dekton®, Crystallized
Glass and other vitreous materials. This Core Bit comes with a
1/2” Gas Thread, designed for the tool holder. The diamonds and
matrix have been selected to minimize blow-out at the bottom of
the stone, since most CNC Router fabrication is done upside-down.
This new Core Bit utilizes the superior technology that has made
the Alpha® Wet and Dry Core Bits the best in the industry.
|
|
|
|
|
|
|
|
|
|
Alpha 1-3/8" CNC Core Bits for Dekton
|
|
|
Alpha CNC Core Bits for Dekton®
Diameter: 1-3/8"
Max RPM: 3,500
Recommended For: Dekton®, Crystallized Glass
Threads: 1/2" Gas Thread
Alpha® introduces a Wet Core Drill Bit for CNC Machines
and Radial Arm workstations for cutting Dekton®, Crystallized
Glass and other vitreous materials. This Core Bit comes with a
1/2” Gas Thread, designed for the tool holder. The diamonds and
matrix have been selected to minimize blow-out at the bottom of
the stone, since most CNC Router fabrication is done upside-down.
This new Core Bit utilizes the superior technology that has made
the Alpha® Wet and Dry Core Bits the best in the industry.
|
|
|
|
|
|
|
|
|
|
CYCLONE FINGER BIT 1-5/8" SEGMENT HIGH SPEED FINGER BIT
|
|
|
The New Super Cyclone Finger Bit has a smaller diameter and six segments designed to cut faster. Ideal for hard materials. High Speed Parameters: * Feed rate : 15" - 22"/min. Standard Speed Parameters: * Feed rate : 10" - 15"/min
|
|
|
|
|
|
|
|
|
|
Alpha CNC Wet Core Bit
|
|
|
Alpha CNC Wet Core Bit
Diameter: 1-3/8"
Max RPM: 2,000
Recommended For: Granite/Eng.Stone
Threads: 1/2" Gas Thread
Alpha® introduces a Wet Core Drill Bit for CNC Machines and Radial
Arm workstations. This Core Bit comes with a 1/2” Gas Thread, designed
for the tool holder. The diamonds and matrix have been selected to minimize
blow-out at the bottom of the stone, since most CNC Router fabrication is
done upside-down. This new Core Bit utilizes the superior technology that
has made the Alpha® Wet and Dry Core Bits the best in the industry.
|
|
|
|
|
|
|
|
|
|
CYCLONE HIGH SPEED FINGER BIT 2"
|
|
|
Diamax Industries presents the NEW for 2012 Cyclone seven segment finger bit. Seven segments are unheard of because typically more finger bits only have 6 segments. Seven segments translates into faster cutting and a more efficient CNC operator. Formulated with a soft bond, this finger bit is ideal for use on hard natural stone. Always dependable, these high-performance 1/2 gas threaded bits are versatile and are to be used wet.. The bottom segment on the end of the bit gives the CNC operator the option of drilling into the slab like a core bit. The New Super Cyclone Finger Bit has a smaller diameter and six segments designed to cut faster. Ideal for hard materials. High Speed Parameters: * Feed rate : 15" - 22"/min. Standard Speed Parameters: * Feed rate : 10" - 15"/min
|
|
|
|
|
|
|
|
|
|
DS ABSOLUTE FINGER BIT 50MM X 20MM W/ BOTTOM SEGMENT
|
|
|
~ Fast cutting (350~580mm/min)
~ Low Ampere (Under 10A)
~ Granite, Marble, Engineered stone, Sandston, Limestone
~ Best solution on any CNC
|
|
|
|
|
|
|
|
|
|
CNC Segmented Finger Bits - 50mm
|
|
|
CNC Segmented Finger Bits
Segmented Finger Bits
Recommended For: Granite/Eng.Stone
Size: 50mm
Diameter: 30mm
Max RPM: 4,500
Alpha® continues to expand its line of tooling for the CNC
machines and has designed a Segmented Finger Bit for CNC
Machines and Radial Arm workstations. This finger bit is available
in two lengths for different thicknesses of materials, 40mm is for 1-1/4”
slab and 50mm is for 1-1/2” laminated materials. These bits come with a
1/2” Gas Thread, designed for the tool holder and can be used on granite
and engineered stone on all CNC machines designed for stone.
|
|
|
|
|
|
|
|
|
|
GMB FINGER BIT
|
|
|
- Dual satisfaction for soft material… Fast and Clean Cutting. - Incredibly longer life span than Vacuum or Electroplated products.
- Wet use only.
|
|
|
|
|
|
|
|
|
|
CNC Segmented Finger Bits - 40mm
|
|
|
CNC Segmented Finger Bits
Segmented Finger Bits
Recommended For: Granite/Eng.Stone
Size: 40mm
Diameter: 30mm
Max RPM: 4,500
Alpha® continues to expand its line of tooling for the CNC
machines and has designed a Segmented Finger Bit for CNC
Machines and Radial Arm workstations. This finger bit is available
in two lengths for different thicknesses of materials, 40mm is for 1-1/4”
slab and 50mm is for 1-1/2” laminated materials. These bits come with a
1/2” Gas Thread, designed for the tool holder and can be used on granite
and engineered stone on all CNC machines designed for stone.
|
|
|
|
