Information
Products2




Home > Power Tools > Rail Saws
We found 3 results matching your criteria.
Filter:
Page of 1
197-722
Blue Ripper Jr Rail Saw with Makita 5477NB
Our Price: $1,999.00


Do you need speed, accuracy and quality work at your job site? The Blue Ripper Jr.™ Rail Saw delivers that and much more. Whether in the shop or out on the job site, the Blue Ripper Jr. Rail Saw nails precision work with ease.

The Blue Ripper Jr.™ Rail Saw makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims, or offset measurements. Your rail is your guide. With this rail system you will have accuracy and smoothness absolutely better, and faster, than by hand


------------------------------------------------------------------------------------

  • Takes full plunge cuts past 4cm deep!
  • Up to 4 FPM cut speed, single pass through 2cm absolute black!
  • 4,300 motor RPM
  • Accepts up to 8" blades
  • Standard 5/8" blade Arbor
  • One-hand water disconnect
  • Easy-adjust locking height adjustment
  • Only 19.8 pounds in weight!
  • Manufactured with PRIDE in the USA!
------------------------------------------------------------------------------------

  • Makita 5477NB hypoid saw
  • 8" blade
  • 10ft. water hose with inline ball-valve shut-off
  • Inline GFCI (Ground Fault Circuit Interrupter)
  • Optional 7ft. Stainless Steel Rail (same rail system as Blue Ripper Sr Rail Saw)
  • Optional 13ft. on piece Stainless Steel Rail (note this rail must ship via truck)
 more info
601-684
Blue Ripper Miter Master Rail Saw
Our Price: $2,999.00

Blue Ripper Miter Master™ for 2 to 3cm Material
This version of the Miter Master™ comes with two 5 inch T-Rex Segmented Granite Blades.

The Blue Ripper Miter Master™ Rail Saw creates a perfectly mitered edge by cutting both 45 degree angles simultaneously. The Blue Ripper Miter Master™ comes with two 5 inch blades.

If you need to create mitered edges on really thin material then this is the Miter Master™ for you! Designed for 2 to 20mm (0 to 2cm or anything 3/4 of an inch or less) material, this version of the Miter Master™ comes with a longer arm, two sets of flanges for extra blade support, and two 5 inch blades. A common blade used with this Miter Master™ is the Electroplated U-Slot Blade

---------------------------------------------------------------------------


    • Cuts both 45 degree angles simultaneously
    • Light, only 28 lbs!
    • Fits on all Blue Ripper Rails
    • Variable speed motors to match your stone
    • Accepts up to 5 inch blades
    • One-hand water disconnect
    • Full plunge through
    • 3cm
    • 20mm
    • Manufactured with PRIDE in the USA!
---------------------------------------------------------------------------

    • Two Makita 9564CV or 9565CV motors
    • Two 5 inch Flush Mount Blades
    • 10 ft Quick-Disconnect Water Line
    • GFCI Protection
 more info
676-877
Blue Ripper Sr Rail Saw
Our Price: $4,550.00



* 2 Horsepower Air-cooled
If 220 volt power is not available at your location, this is the Blue Ripper Sr rail saw for you. Built to the same specification as our 3hp saw, and spinning at the same speed of 1750 rpm. This saw works best on 2cm thick materials, multiple passes are often required for 3cm and thicker materials, due to the lack of Horse Power.

These saws can cut through 4cm thick stone. The 3hp can cut 2cm "Absolute Black" granite up to the incredible speed of 10 ft. per MINUTE! Simple and strong, the blade cuts next to rail so setting up is fast and easy. No gauge, shims, or offset measurements are needed. The 5hp saw itself, weights only 68 lbs. which makes it easy for a single person to lift and move. The reduced weight also minimizes risk of cracking narrow or thin pieces of material. This rail saw is truly amazing and is considered by the experts to be far superior than the competition in performance and ease of use.


---------------------------------------------------------------------------
    • Up to 10 FPM cut speed
    • 1730 RPM TEFC Lincoln Induction Motor (2hp & 3hp models)
    • 2hp 110v at 18 Amps
    • 14 inch blade
    • 60mm blade arbor
    • 8" diameter billet aluminum flanges
    • All connections mounted vertical
    • One-hand water disconnect
    • Easy-adjust locking height adjustment
    • Weight: Only 79 lbs approx. on (2 and 3hp) models!
    • Cuts through 4cm (1-5/8") stone
    • Manufactured with PRIDE in the USA!
 more info